Design for testing 3 phase protection relays,
Energy Meter & Transducer;
Laptop PC or PDA control;
6 current & 4 voltage output;
Other models of different current & voltage are also available.

Microprocessor controlled with phase angle shifter and frequency generator;
Design for testing relays and transducers;
High power outputs;
Oscilloscope function of current and voltage.

Built in digital time display contact time in cycles & milli seconds;
Provides variable AC current source up to 250A;
Back- lit LCD screen;
Provides variable AC voltage source up to 250V;
Provides variable DC voltage source up to 300V;
Auxiliary AC/DC power supplies 24Vdc, 124Vdc and 240Vdc;
Test current transform excitation;

CT excitation, ratio and polarity test;
Primary injection testing capabilities;
3000V AC Hipot Testing;
Generation up to 800Amps;     
Test results & setting are saved into local memory.

Saturation test using the ANSI/IEEE C57.13.1;
Voltage range from 50,300,500,1200 and 2000 Vac;
Polarity test and CT ratio test range from 0.8 to 5000;
CT Winding resistance from 100 micro-ohm to 10 ohms;
CT burden test by injecting 1A or 5A test current;
Built in 2.5 inch wide thermal printer;
Computer interface via RS232C or USB port;

Circuit breaker timing test set; Up to 2 break per pole;
Static and dynamic contact resistance measurement;
Built in 200A Micrometer & Battery Operation;
Motion and speed analyzer.

Built in 200A microhmmeter;
12 Auxiliary timing input;
Analysis & Result evaluation directly on the display;
18 main and 18 resistive contact input;
Motion & Speed analyzer.

Quick shot mode for on-line timing,
Capture first trip time;
Static and dynamic contact
resistance measurement;
Detects main contact and
insertion-resistor contact
on same input channel;
Prints breaker analysis results
in both tabular and graphic format.
Supports resistance type transducer

Automatic testing; 
Voltage can be selected from
1KVdc to 80KVdc in steps of 1KVdc; 
Built in 2.5 inch thermal printer;
Reliable and lightweight;
Can stores up to 84 test
records of 16 readings;
Computer interface via RS232C
or USB port;

High current output up to 7000A;
Powerful output up to 35KVA;
Modular design for easy transport;
Protections relay test;
Low voltage breaker testing;
Heat run test & CT testing;

Primary Injection testing capabilities;
Generates up to 800A (Optional up to 4000A);
3000V AC Hipot Testing;
Test result and settings are saved into local memory;
Large graphical display.

Ruggedly constructed for field use;
High current output with appropriate controls & instrumentation;
Output up to 1000A, 5V;
Overload: 5000Amps;
Short duration overloads are possible on each taps

Test protection system;
Test the time delay characteristics
of protection relays and MCCB;
Measure internal and external circuit;
Provide thermal protection;

Third harmonic analysis of leakage current with compensation;
Online diagnostics of metal oxide surge arrestors;
According to IEC60099-5A1 “diagnostics indicators of metal oxide surge arrestors in service”;

Outstanding imaging and temperature measurement;
Measurement Range: 0° C to + 250° C;
Field of view (FOV): 20°x15°;
Zooming facility available;
Hot and cold spot detection;
Battery operated.

Outstanding imaging and temperature measurement performance; Suitable for high temperature measurement;
Imaging Range: +50° C to + 900° C;
Field of view (FOV): 20°x15°;
Detection: 160 X 120 pixels;
Colour LCD with LED backlight;
Battery operated.

Audio out for headset or Pc recording;
7 segment display in relative dB mode;
90 dB dynamic range display;
Center frequency range 40 KHz;
Bandwith38KHz to 48 KHz;
4 hour autonomy;
Integrated display.

HV and MV SF6 Circuit Breakers
Current and Voltage Transformer
High Voltage Surge Arrestors (MOV’s)

The most accurate overhead transmission and distribution line fault locator;
Accuracy: ± 150m typical, regardless the line length;
Time synchronization with accuracy of ± 1 µs;
Unaffected by fault resistance;
Suitable for all kind of power lines AC and DC;
Automatic distance to fault calculation;
Unlimited number of monitored lines;
Reduce overhead lines outage time;
Non intrusive installation;
Easy to set up;